BCHRV - ZEP OLD SMOKEY AEROSOL CLEANER

  • MSDS: BCHRV
  • Manufacturer: ZEP MANUFACTURING COMPANY
  • Product Name: ZEP OLD SMOKEY AEROSOL CLEANER
  • National Stock Number: 7930-00N001387
Product Identification

Product ID:ZEP OLD SMOKEY AEROSOL CLEANER
MSDS Date:01/01/1985
FSC:7930
NIIN:00N001387
MSDS Number: BCHRV

Responsible Party
ZEP MANUFACTURING COMPANY
1310 SEABOARD INDUSTRIAL BLVD NW
ATLANTA, GA 30301
US

Cage: 72674

Contractor
ZEP MANUFACTURING COMPANY
2015 ATLANTA, GA 30301 US

Telephone: (404) 352-1680

Cage: 72674

Ingredients

GLYCOL ETHER

CAS: 111-46-6

RTECS: ID5950000

Fraction By Weight: 2%

ACGIH TLV: 50 PPM (MFR)


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 13%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


ISOBUTANE (AEROSOL PROPELLANT)

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 5%

ACGIH TLV: 500 PPM

Hazards

Effects of Overexposure:EYE IRRITATION

First Aid

First Aid:FLUSH EYES WITH WATER 15 MINUTES AND SEEK MEDICAL ATTENTION.

Fire Fighting

Fire Fighting Procedures:WATER SPRAY TO COOL EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:PRESSURIZED CONTAINER. MAY BURST IF
HEATED ABOVE 120F/48C.

Accidental Release

Spill Release Procedures:DUE TO PACKAGE TYPE,SPILLS ARE UNLIKELY. IN
CASE PRODUCT IS RELEASED,MOP UP WITH CLOTH,SPONGE,PAPER TOWELS.
RINSE SPILL AREA THOROUGHLY.

Handling

Handling and Storage Precautions:STORE IN A COOL DRY PLACE AWAT FROM
HEAT,OPEN FLAMES AND DIRECT SUNLIGHT. STORE BELOW 120F/48C.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID SPRAYING INTO
EYES.

Exposure Controls

Respiratory Protection:NONE
Ventilation:GENERAL
Protective Gloves:NONE
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:205F/96C
Spec Gravity:0.95
Evaporation Rate & Reference:1 (WATER)
Solubility in Water:COMPLETE
Appearance and Odor:CLOUDY,THIN,COLORLESS LIQUID W/PLEASANT FRAGRANCE.
Percent Volatiles by Volume:99

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:NORMAL METHODS FOR AEROSOLS. DO NOT CRUSH
PUNCTURE,ORINCINERATE AEROSOL CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.